[1]何发亮.大芯体压接式支柱复合绝缘子的研制[J].电瓷避雷器,2020,(02):222-228.[doi:10.16188/j.isa.1003-8337.2020.02.035]
 HE Faliang.Development of Crimped Composite Post Insulator with Large Diameter Core Rod[J].,2020,(02):222-228.[doi:10.16188/j.isa.1003-8337.2020.02.035]
点击复制

大芯体压接式支柱复合绝缘子的研制()
分享到:

《电瓷避雷器》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2020年02期
页码:
222-228
栏目:
绝缘子
出版日期:
2020-04-25

文章信息/Info

Title:
Development of Crimped Composite Post Insulator with Large Diameter Core Rod
作者:
何发亮
(河北荣森电气有限公司, 河北 肃宁 062350)
Author(s):
HE Faliang
(Hebei Rongsen Electric Co., Ltd., Suning 062350,China)
关键词:
大芯体 压接式 支柱复合绝缘子 LSR 负荷下的偏移
Keywords:
large diameter core rod crimped composite post insulator liquid silicone rubber deflection under load
DOI:
10.16188/j.isa.1003-8337.2020.02.035
摘要:
大芯体压接式支柱复合绝缘子从结构设计、芯体尺寸、材料选用、成型工艺、压接装配等方面进行了研究,满足即使在恶劣环境中的使用要求。端部法兰金具与大直径芯体采用压接工艺装配连接,解决了现有胶装式支柱复合绝缘子在弯曲负荷下的偏移值过大的问题,刚性明显得到提高。外绝缘选用LSR高温硫化液态硅橡胶材料,注射生产效率提高,性能更稳定。在交流550 kV、363 kV、252 kV、126 kV,直流±500 kV、±400 kV电压电站系统中,压接式支柱复合绝缘子的性能优点表现得尤为突出,芯体直径选用Φ130~Φ220 mm,提高了产品抗弯、抗扭负荷的安全裕度,显著提升系统运行的可靠性,是胶装式复合支柱的替代选择。
Abstract:
Research on the structural design, core size, material selection, molding process, compression assembly on the crimped composite post insulators with large diameter core rod has been made. The composite insulators meet the environment requirements, even if in a bad environment. The metal fittings of flanges and the core rod are assembled by crimping technology, which solve the problem of too large deflection under cantilever load of existing glue-mounted composite post insulators and obviously improve the rigidity. The LSR high temperature vulcanization silicone rubbers are used as the external insulation, so that the production efficiency is improved and the performance is more stable. In the power station systems of AC 500 kV, 363 kV,252 kV,126 kV and DC±500 kV, ±400 kV, the performance of such kind of composite post insulators is particularly prominent. The core rods with diameter of Φ130 mm to Φ220 mm improve the safety margin of bending resistance and torsion load, and particularly improve the reliability of system operation. It is an alternative choice for the ceramic post insulators and glue-mounted composite post insulators.

参考文献/References:

[1] 赵晓静,赵宇明,谢竹青,等.玻璃纤维含量对复合绝缘子芯棒机械性能的影响[J].南方电网技术,2011(1):78-80.ZHAO Xiaojing, ZHAO Yuming, XIE Zhuqing, et al. The effect of fiber content on mechanical performance of composite insulators FRP rod[J]. Southern Power System Technology, 2011(1): 78-80.
[2] 王兴华,王仲莉,张根荣.复合绝缘子芯棒性能分析[J].纤维复合材料,1997(2):17-21.WANG Xinghua, WANG Zhongli, ZHANG Genrong. Performance analysis of the composite insulator core rod[J]. Fiber Composites, 1997(2): 17-21.
[3] 张福林.复合绝缘子耐酸芯棒的材料选择及主要拉挤成型工艺参数的确定[J].纤维复合材料,2001(3):28-30.ZHANG Fulin. Selection of materials for acid resistant composite insulator core rod and determination of main processing parameters[J]. Fiber Composites, 2001(3): 28-30.
[4] 马斌,罗兵,李全文,等.±800 kV直流支柱复合绝缘子制造技术[J].南方电网技术,2009(4):49-52.MA Bin, LUO Bing, LI Quanwen, et al. Manufacture technology of ±800 kV post composite insulators[J]. Southern Power System Technology, 2009(4): 49-52.
[5] 王黎明,汪创,傅观君,等.特高压直流平波电抗器的复合支柱绝缘子抗震特性[J].高电压技术,2011(9):2081-2088.WANG Liming, WANG Chuang, FU Guanjun, et al. Antiseismic characteristics of composite post insulators for smoothing reactors on UHVDC[J]. High Voltage Engineering, 2011(9): 2081-2088.
[6] 邢琳,周庆庆,尚勇,等.750 kV隔离开关用支柱复合绝缘子关键技术研究[J].陕西电力,2014, 42(2):44-47.XING Lin, ZHOU Qingqing, SHANG Yong, et al. Key technology of post composite insulator used in 750 kV AC disconnecting Switch[J]. Shaanxi Electric Power, 2014, 42(2): 44-47.
[7] 周庆庆,龚兴国,李青,等.复合绝缘材料在750 kV变电站中应用的关键技术[J].电力建设,2013(11):105-109.ZHOU Qingqing, GONG Xingguo, LI Qing, et al. Key technologies of composite insulating materials adopted in 750 kV substation[J]. Electric Power Construction, 2013(11): 105-109.
[8] 张育华,金强.复合外套避雷器在电力系统中的应用[J].电瓷避雷器,2007(2):25-29.ZHANG Yohua, JIN Qiang. Application of polymeric surge arrester in power system[J]. Insulators and Surge Arresters, 2007(2): 25-29.
[9] 郁杰,邱勇,彭生江,等.基于抗弯试验的支柱绝缘子受力分析及法兰优化[J].工程技术,2015(11):162-164.YU Jie, QIU Yong, PENG Shengjiang, et al. The stress analysis and flange optimization based on bending test of post insulator[J]. Engineering & Technology, 2015(11): 162-164.
[10] 丘志贤.高压绝缘子的设计与试验[J].电瓷避雷器,1976(3):01-86.QIU Zhixian. Design and test of the high voltage insulator[J]. Insulators and Surge Arresters, 1976(3): 01-86.
[11] 张福林,邸向辉.复合绝缘子压接连接界面金具部件塑变规律及其结构尺寸选择[J].电网技术,2001(4):54-56, 61.ZHANG Fulin, DI Xianghui. Plastic deformation law ofend-fitting at press-tight joint interface of composite insulator and its structure size selection[J]. Power System Technology, 2001(4): 54-56, 61.
[12] 刘铁桥,何发亮,何耀兵.UC控制的特高压复合绝缘子端部压接可靠性及声发射监测[J].电瓷避雷器,2013(4):01-04.LIU Tieqiao, HE Faliang, HE Yaobing. The crimping reliability of UHV composite insulator end fittings controlled by UC and acoustic emission monitoring[J]. Insulators and Surge Arresters, 2013(4): 01-04.
[13] 余涛,杨新华.压接式复合绝缘子接头处的破坏分析[J].水电能源科学,2010, 28(10):139-141.YU Tao, YANG Xinhua. Failure analysis of connector of crimp-style composite insulator[J]. Water Resources and Power, 2010, 28(10): 139-141.
[14] 韦晓星,孙勇,陈如龙,等.水平安装支柱瓷绝缘子断裂故障及弯曲负荷分析[J].电瓷避雷器,2017(2):156-163.WEI Xiaoxing, SUN Yong, CHEN Rulong, et al. Breakage failure and bending strength analysis of porcelain post insulators in horizontal installation[J]. Insulators and Surge Arresters, 2017(2): 156-163.
[15] 周柏杰,吴雄,胡虔.输电杆塔用复合材料性能研究——树脂体系对复合材料性能的影响[J].玻璃钢/复合材料,2014(4):66-71.ZHOU Baijie, WU Xiong, HU Qian. Study on the properties of fiber reinforcned polymers(frp)used in the power transmission poles——influences of the resin systems on the properties of frp[J]. Fiber Reinforced Plastics/Composites, 2014(4): 66-71.
[16] 周曙琛,刘西中,朱勇,等.电站设备外绝缘全复合化趋势[J].电网与清洁能源,2013, 29(8):54-62.ZHOU Shuchen, LIU Xizhong, ZHU Yong, et al. Fully composite tendency of external insulation for power station equipment[J]. Advances of Power System & Hydroelectric Engineering, 2013, 29(8): 54-62.

备注/Memo

备注/Memo:
收稿日期:2018-07-13作者简介:何发亮(1980—),男,学士,工程师,现从事电力产品和绝缘材料的开发研究。
更新日期/Last Update: 2020-04-25