[1]田 冰,朱成洋,郭向洋.氧化锌压敏陶瓷制备过程中造粒除尘粉料的再回收利用[J].电瓷避雷器,2020,(01):54-58.[doi:10.16188/j.isa.1003-8337.2020.01.009]
 TIAN Bing,ZHU Chengyang,GUO Xiangyang.Recycling of Granulated Dusting Powder During Preparation of Zinc Oxide Varistor Ceramics[J].,2020,(01):54-58.[doi:10.16188/j.isa.1003-8337.2020.01.009]
点击复制

氧化锌压敏陶瓷制备过程中造粒除尘粉料的再回收利用()
分享到:

《电瓷避雷器》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2020年01期
页码:
54-58
栏目:
避雷器
出版日期:
2020-02-20

文章信息/Info

Title:
Recycling of Granulated Dusting Powder During Preparation of Zinc Oxide Varistor Ceramics
作者:
田 冰 朱成洋 郭向洋
(金冠电气股份有限公司,河南 南阳 473000)
Author(s):
TIAN Bing ZHU Chengyang GUO Xiangyang
(Jinguan Electric Co., Ltd., Nanyang 473000, China)
关键词:
除尘料 喷雾造粒 电性能 回收利用
Keywords:
dust remover spray granulation electrical properties recycling
DOI:
10.16188/j.isa.1003-8337.2020.01.009
摘要:
除尘料是喷雾造粒过程中产生的一种粒径较小的粉料,直接使用影响粉料的干压成型,且压制的产品性能差。将除尘料进行重新制浆,与正常氧化锌制备的浆料进行1:1混合,再喷雾造粒,制备出的氧化锌压敏陶瓷电性能达到正常料的水平,做到了除尘料的再回收利用,提高了材料利用率。
Abstract:
The dust-removing material is akind of small-sized powder produced during the spray granulation process, and its direct application will affect the dry pressing of the powder, and leads to poor product performance. In this paper, the dust-removing material is re-pulped, and the slurry prepared by normal zinc oxide is mixed 1:1, and then spray granulated. The electrical properties of this zinc oxide varistor ceramics reach the level of normal materials, so that the dust removal material is re-used, improving the material utilization rate.

参考文献/References:

[1] 傅静,徐政. ZnO压敏电阻器的性能及发展[J]. 现代技术陶瓷,2004,25(1):31-36. FU Jing, XU Zheng. Study on properties of low-voltage ZnO varistor and its development[J]. Advanced Ceramics, 2004, 25(1): 31-36.
[2] MATSUOKA M. Nonohmic properties of zinc oxide ceramics[J]. Japanese Journal of Applied Physics, 1971, 10(6): 7.
[3] 王士良,莫以豪. 氧化锌压敏电阻器[J]. 物理,1979(4):354-358. WANG Shiliang, MO Yihao. Zinc oxide varistors[J]. Physics, 1979(4): 354-358.
[4] LEVINSON L M, PHILIPP H R. Zinc oxide varistors-a review[J]. Ceram.Bull, 1986(65): 639-646.
[5] EINZINGER R. Metal oxide varistors[J]. Materials Science, 1987(17): 299-321.
[6] 祁明,陈秀丽,周焕福,方亮,褚冬进. 氧化锌压敏电阻器低成本化制备技术研究进展[J]. 材料导报,2014, 28(S1):170-172. QI Ming, CHEN Xiuli, ZHOU Huanfu, FANG Liang, CHU Dongjin. Research progress in low-cost preparation technology of Zinc oxide varistors[J]. Materials Review, 2014, 28(S1): 170-172.
[7] 陶晔波. 电子陶瓷金属化的研究[D]. 杭州:浙江大学,2016.
[8] 王文婷. 敏感陶瓷溅射金属化机制及产业化研究[D]. 杭州:浙江大学,2014.
[9] 林斌. 爱普科斯公司低成本战略的实施研究[D]. 长春:长春理工大学,2013.
[10] 颜健. 喷涂制备氧化锌压敏电阻贱金属电极[D]. 广州:华南理工大学,2017.
[11] 陈国良. 氧化锌压敏电阻电极-引线低成本高可靠性封装技术研究[D]. 广州:华南理工大学,2018.
[12] SANAEI-MOGHADAM Maryam, JAHANGIRI Mansour, HORMOZI Faramarz. An experimental study on the spray characteristics of pressure nozzle in a fluid bed granulation[J]. Particulate Science and Technology, 2019, 37(1): 39-50.
[13] 杨战厚,徐子勤,王军成,王明俊,蒋翔,魏婷. 球形氧化铝粉体喷雾造粒法的制备及工艺研究[J]. 陶瓷,2019(03):38-40. YANG Zhanhou, XU Ziqin, WANG Juncheng, WANG Mingjun, JIANG Xiang, WEI Ting. Preparation and process study of spherical alumina powder spray granulation method[J]. Ceramics, 2019(03): 38-40.
[14] 何非,沈康,夏天阳. 喷雾造粒生产线关键设备结构可靠性分析研究[J]. 中国农机化学报,2017, 38(7):40-44. HE Fei, SHEN Kang, XIA Tianyang. Study on reliability analysis of key equipment structure of spray granulation production line[J]. Journal of Chinese Agricultural Mechanization, 2017, 38(7): 40-44.
[15] 纪龙成. 压力式喷雾干燥机设备改造与出料效率的提升[J]. 中国设备工程,2018(03):74-75. JI Longcheng. Equipment reform and outlet efficiency improvement of pressure spray dryer[J]. China EquipmentEngineering, 2018(03): 74-75.
[16] 庞兆信,罗建东,李呈光,等. 气流喷雾干燥技术研究[J]. 化学工程,2005, 33(5):13-16. PANG Zhaoxin, LUO Jiandong, LI Chengguang, et al. Study on airflow spray drying technology[J]. Chemical Engineering, 2005, 33(5): 13-16.
[17] 王振林,李盛涛. 氧化锌压敏陶瓷制造及应用[M]. 北京:科学出版社,2017.
[18] 申海涛,霍建华,师入伏. 影响氧化锌压敏瓷喷雾造粒粉体性能的因素[J]. 电子元件与材料,1995(02):27-32. SHEN Haitao, HUO Jianhua, SHI Rufu. Factors affecting the performance of Zinc oxide pressure sensitive ceramic spray granulation powder[J]. Electronic Components and Materials, 1995(02): 27-32.
[19] 冯留海,赵凡,刘美丽,盛文君,左晶,毛羽. 喷嘴径向位置对喷雾造粒塔流动特性的影响[J]. 石油学报:石油加工,2016, 32(5):1013-1019. FENG Liuhai, ZHAO Fan, LIU Meili, SHENG Wenjun, ZUO Jing, MAO Yu. Influence of radial position of nozzle on flow characteristics of spray prilling Tower[J]. Acta Petrolei Sinica(Petroleum Processing Section), 2016, 32(5): 1013-1019.
[20] 赵婷,卫丹,秦毅,朱建锋.喷雾造粒氧化硅微球的致密化烧结研究[J].陕西科技大学学报,2018,36(03):123-126. ZHAO Ting, WEI Dan, QIN Yi, Zhu Jianfeng. Study on densification sintering of spray granulated silica microspheres[J].Journal of Shaanxi University of Science and Technology,2018,36(03): 123-126.
[21] BOERNER Matthias, HAGEMEIER Thomas, GANZER Gunnar, PEGLOW Mirko, TSOTSAS Evangelos. Experimental spray zone characterization in top-spray fluidized bedgranulation[J]. Chemical Engineering Science, 2014, 116: 317-330.
[22] 付静波,庄飞,张晓. 黏结剂含量对喷雾造粒钼粉形貌和物理性能的影响[J]. 中国粉体技术,2013, 19(4):81-83. FU Jingbo, ZHUANG Fei, ZHANG Xiao. Effect of binder content on morphology and physical properties of spray granulated Molybdenum powder[J]. China Powder Science and Technology, 2013, 19(4): 81-83.

备注/Memo

备注/Memo:
收稿日期:2019-08-01作者简介:田冰(1991—),男,本科,长期从事氧化锌压敏电阻片的研究。
更新日期/Last Update: 2020-02-20